Smart welding machine Tatta TA-MMA-300, self-test at start-up, absorbed power 9.5 kVA, efficiency 85%, electrode 1.6-4.0 mm
Portable welding machine, easy to handle. Displayed electronically. The Tatta TA-MMA-300 welding inverter is robust, made of metal and plastic resistant to harsh working conditions. Electronic components are cooled by electric fans with high air flow.
If the maximum internal temperature limit is exceeded, the device stops working until the internal temperature drops to normal operating values. Tatta TA-MMA-300 is a single-phase welding machine , inverter type, especially recommended for welding with covered electrodes in direct current, through the MMA (Manual Metal Arc) process.
With this Tatta TA-MMA-300 welding machine you successfully weld all types of coated electrodes (rutile electrodes, basic electrodes, stainless electrodes, etc.) a diverse range of materials such as alloyed and non-alloyed steel, stainless steel, cast iron, aluminum , copper, etc. Certified quality!
Characteristics:
- Accessories: Electrode holder 200A + 16mm²*1.6M, earthing clamp 200A + 16mm²*1.3M, Welding mask, Brush
- Power On Self Test (POST). When the device is turned on, the system performs a complete inspection and testing of the welding conditions, which protects the components, especially the key components such as the IGBT inverter, the diode, the capacitors, the circuit board, etc.
- Fully equipped with functions such as thermal protection, overload protection, anti-sticking, electric arc, VRD.
- Suitable for a wide range of voltages, between 160V-260V.
- Saving energy. if the welding machine is not used for a few minutes, the machine will automatically enter sleep mode. If you do not use the device even after entering the sleep mode, the device will turn off automatically.
- Acid welding electrodes and alkaline (basic) welding electrodes can be used for welding.
- POWER CABLE DIMENSIONS / LENGTH: COPPER CABLE 3*1.5mm², EXTERIOR 1.6M; European VDE type plug with two pins
- Output cable size/length: 16mm² * 1.6M，16mm² * 1.3M
- DUTY CYCLE: 60%
- Efficiency (%): 85
- Power factor: 0.93
- Usable electrode (mm): 1.6-4.0 mm
- FREQUENCY: 50/60Hz
- VOLTAGE: alternating current 160-260V
- Output current adjustment (A): 20-300
- Minimum power capacity/grid (kva): 5.5
- Minimum power/generator capacity (KVA): 14
- Entry Protection/Safety (A): 50
- Input protection/circuit breaker (A): 53
- Absorbed power (KVA): 9.5
- Output voltage (V): 30
- Welding current (A): 300
- No-load voltage (V): 70
- CE standard
- Weight 4 Kg.
